How often should I check my tire pressure?
Experts say that you must check your tire pressure at least once a month and before going on a long trip. Also, make it a habit to check your tires every time you fill up your gas tank. Ideally, tire pressure should be measured when tires are cold—that is, when you have driven less than a mile. Otherwise, your tires may have heated up, increasing the inflation pressure inside them by several pounds. This is normal. Never "bleed" or reduce the inflation pressure in a hot tire. Also, don't forget to check the pressure of your spare tire at the same time.
What is the correct air pressure for my tires?
There is no universal "right" pressure for all tires. The proper inflation level will depend on your vehicle and it may even be different for your front and back tires. To find the correct pressure for your tires, look at the tire information placard that’s mounted inside the frame of the driver’s door, in the glove box or inside the fuel door. You can also get that information in your vehicle owner’s manual and from your tire service professional. It's important to be accurate in filling your tires. Don't try to "eyeball" the pressure—a tire can lose half its pressure without looking flat. Instead, use a reliable tire pressure gauge. It's also a good idea to have your own gauge, because you can’t always count on the gauge on the inflation hose at the gas station. According to a study, less than half the service stations with inflation pumps provide a tire pressure gauge for customer use. Even if there is one, it may not be accurate—about 20 percent of the gauges on station pumps are damaged or off by 4 psi (28 kPa) or more.
How often should I check my wheel alignment?
Wheel alignment and balancing are important for safety and maximum tread wear from your tires. Inspect your tires regularly: at least once a month inspect your tires closely for signs of uneven wear. Uneven wear patterns may be caused by improper inflation pressure, misalignment, improper balance or suspension neglect. If not corrected, further tire damage will occur. These conditions shorten the life of your tires and may result in loss of vehicle control and serious personal injury. If any of these conditions exist, the cause may often be corrected at your tire dealer or other service facility. Your tires will then last longer.
How important is it that I rotate my tires?
Rotation is important because each tire on a car carries a different amount of weight, making them wear at different rates. By rotating them, you basically even out those differences. Your owner’s manual will tell you how often to rotate your tires, but as a rule of thumb, it should be done every 5,000 to 8,000 miles. You might want to rotate them sooner if you see signs of uneven wear. Misalignment and other mechanical problems can also cause such wear, so check with your mechanic to determine the cause.
In what pattern should my tires be rotated?
There are various patterns for rotating tires. A common one for front-wheel drive vehicles involves moving the tires in a criss-cross fashion, with the left front tire trading places with the right rear, and right front trading with the left rear. If you have a full-size spare, you can include it in your rotation pattern—but don’t do so with a small “temporary use” spare, because those are meant only for low-speed, short-distance emergency use. The proper rotation pattern depends on the type of vehicle and tires, so be sure to look at your owner’s manual. After rotation, adjust the inflation pressure of each tire for its new location, using the vehicle manufacturer’s recommendations.
What should I look for when inspecting my tires?
In addition to performing regular maintenance, you must also keep an eye out for potential problems that might affect your tires. Regular inspections can help you prevent tire trouble, and keep you rolling safely down the road. When inspecting your tires, look for:
- Uneven tread wear. This can include more wear on one tread edge than the other, a rippled pattern of high and low wear, or exposed steel wire. Uneven wear can be caused by problems such as underinflation, misalignment and improper balancing.
- Shallow tread. Bald tires tend to skid and slide on the pavement, and are more likely to be damaged by potholes and other road hazards. The tread on your tire should be at least 2/32 inch (1.6 mm) tread depth everywhere on the tread face. If it isn’t, the tire must be replaced. To help you see tread problems, tires have built-in “tread wear indicators.” These are narrow bars of smooth rubber that run across the tread: When any portion of the tread is even with the bars, it is worn down to the minimum level and must be replaced immediately. You can also try the penny test: place a penny in the tire's most worn groove with Lincoln's head facing down. If you can see the top of Lincoln's head, the tire should be replaced.
- Troublemakers. Check for small stones, pieces of glass, bits of metal and other foreign objects that might be wedged into the tread, and carefully pick them out. They can cause serious problems if they are pushed farther into your tire as you drive.
- Damaged areas. Cracks, cuts, splits, punctures, holes and bulges in the tread or on the sides of the tire can indicate serious problems, and the tire may need to be replaced.
- Slow leaks. Tires lose some inflation pressure (about 2 psi or 14 kPa) over the course of a month or so, but if you find that you have to add inflation pressure every few days, have the tire, wheel and valve checked—and if necessary, repair or replace the tire.
- Valve caps. Those little caps on your tire’s valve stem keep moisture and dirt out, so make sure they are on all your tires. Also, when you have a tire replaced, have a new valve stem assembly installed at the same time. Driving on a damaged tire can be dangerous. If you see something you’re not sure about during your inspection, have it examined by your tire service professional. Any time you see damage to a tire, don’t drive on it—use a spare if you need to go somewhere. And finally, pay attention to the “feel” of your tires as you drive. A rough ride may indicate tire damage or excessive wear. If you notice vibrations or other disturbances while driving, and/or you suspect possible damage to your tire or vehicle, immediately reduce speed, drive with caution until you can safely pull off the road and stop, and inspect your tires. If a tire is damaged, deflate it and replace it with your spare. If you do not see any tire damage and cannot identify the source of the vibration, have the vehicle towed to a mechanic or tire dealer for a thorough inspection.
Can I mount my own tires?
Tire mounting can be dangerous and should only be done only by trained tire service professionals using proper tools and procedures. Serious injury or death may result from explosion of tire/rim assembly due to improper mounting. Always have your tire service professional mount your tires on rims. If you are not a trained tire service professional, never attempt to mount tires.
What do all of the numbers and letters on my tire sidewall mean?
Please refer to the sidewall information in the Tire Replacement Guide section of the Mastercraft web site.
How do I register my tires online?
Mastercraft Tire cares about your safety. Tire registration information provides Mastercraft with required data in order to contact you should there ever be a recall of your product. To register your tires online, go to Register Your Tires under Customer Care on the web site. You will need the following information to register your tires:
- Customer Information — Your name and address.
- Tire Information — The quantity and tire ID number (DOT)* for each tire purchased. *Your DOT number should read like this example: UP0RCNK2309. The full 11-digit DOT number is located on only one side of the tire. You may have to check the other side of your tires for the proper DOT to input for on-line registration.
What do I do if I think my tire has been recalled?
To ensure your safety and satisfaction with our product, any consumer who believes they are affected by a recall should not wait to receive a notification but should contact their nearest Mastercraft Tire dealer or contact:
Cooper Tire Consumer Relations Department
at 800-854-6288 (toll free)
If the tire dealer inspection verifies that you have a tire or tires that are part of a recall, it/they will be replaced with new tire(s) and will be mounted and balanced at no charge. Should any questions or issues arise while tires are being inspected or replaced, please call Cooper Tire Consumer Relations Department at 800-854-6288.
If you are affected by a recall, and we or your Mastercraft Tire dealer fail to replace your tire without charge and within a reasonable amount of time, you may submit written notification to the Secretary of Transportation at the following address:
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
Phone the National Highway Traffic Safety Administration’s Vehicle Safety Hotline
at 888-327-4236 (TTY 800-424-9153)
Go to www.safercar.gov
Where can I find the date a tire was manufactured?
The date of manufacture is part of the serial number (DOT) which is located on only one side of each tire (the other side may have only a partial number or no number). The DOT is an 11-character number and looks like this: UP0RCNT1209. The date of manufacture for this DOT is the12th week of 2009 (1209). If the DOT ends in only three (3) digits (contains only 10 characters), the tire was manufactured before January 2000 and should be removed from service and scrapped because it is over 10 years old.
How can I find out which Mastercraft tire fits my vehicle?
Always check the vehicle placard or vehicle owner's manual for the proper tire size. Then select the right Mastercraft tires for your vehicle by using the Tire Selector found on the Mastercraft Tire web site. There you will specify the year and make of your vehicle and be able to view your tire options. By selecting a tire option, you can then view the tire, its ratings, and its features and benefits. ALWAYS check with your local tire dealer to confirm your tire selection, before replacing your tires. Mastercraft tires are sold through independent tire dealers. To find a dealer near you, go to the dealer locator on the Mastercraft web site.
What is the warranty coverage on my tire?
All authorized Mastercraft Tire dealers can determine warranty eligibility on Mastercraft tires. Mastercraft products are backed by a limited warranty that our independent tire dealers administer on a regular basis. Any tire that is deemed to have an eligible adjustable condition as determined by one of our independent tire dealers shall be processed according to the terms of the Mastercraft Warranty Program. Our independent tire dealers make the determination on what qualifies as an eligible adjustable condition, and handle all warranty returns. Mastercraft Tire does not warranty road hazards. Please direct any warranty related questions to your Mastercraft dealer. To find a dealer near you, go to the dealer locator on the Mastercraft web site.
Does Mastercraft offer road hazard warranty on tires?
Mastercraft does not offer a road hazard warranty. Mastercraft products are backed by a limited warranty that excludes road hazard type damage. Any tire that is deemed to have an eligible adjustable condition as determined by one of our independent tire dealers shall be processed according to the terms of the Mastercraft Warranty Program. If road hazard coverage is important to you, we would suggest you check with an independent Mastercraft Tire dealer in your area or contact your vehicle insurer for information on this type of coverage.